Assembly step 1 Step Description Specifications Frame Socket Head Inner Hexagon Bolt M10*35 Spring Washer Flat washer Φ20*Φ10.5*2 Main Frame Back support frame Hexagon socket countersunk head screws M10*30...
Page 8
Assembly step 2 Step Description Specifications Upper support frame Seat pad adjustable frame Sliding bushing set Hexagon socket countersunk head screws M8*30 Hexagon socket countersunk head screws M12*25 Hexagon socket countersunk head screws M12*65 Spring washer Spring washer Flat waher Φ16*Φ8.4*1.6 Flat waher Φ24*Φ13*2.5...
Page 9
Assembly step 3 Step Description Specifications Right cam Left cam Connection Frame Left Moving frame Right Moving frame Spindle 2 End cap Decorating Ring Button Head Inner Hexagon Bolt M10*25 Spring washer...
Page 10
Assembly step 4 Step Description Specifications Limited frame Bumping post 2 Wide Pulley set Pulley Cover Hexagon socket countersunk head screws M10*70 Hexagon socket countersunk head screws M12*35 Big washer Φ37*Φ13*3 Spring washer Spring washer Square plate with single hole...
Page 11
Assembly step 5 Step Description Specifications Guide Rod Guide Rod Fixer Bumper Bumper Guide Rod end cap Select Pin Socket Head Inner Hexagon Bolt M8*20 Spring Washer Flat washer Φ16*Φ8.4*1.6 Pulley set Half-Pulley Cover Cable 1 Cable 2 10 lb weight stack 10 lb weight stack Hexagon socket countersunk head screws M10*50...
Page 12
Assembly step 6 Step Description Specifications Top Cap Shield fixer Front Cover Back Cover Cross recessed countersunk head screw M5*10 Socket Head Inner Hexagon Bolt M6*16 Spring Washer Flat washer Φ12*Φ6.4*1.6...
Page 16
Exploded List Description Specifications Main Frame Upper support frame Right cam Left cam Connection Frame Back support frame Seat pad adjustable frame Limited frame Left Moving frame Right Moving frame Right adjustment part Spindle 2 Limited screw Adjustable Handle Fixed axis Torsion Spring Bumping post 2 Wide Pulley set...
Page 17
Exploded List Description Specifications Right adjustment part Rolling Bearing 10 lb weight stack 10 lb weight stack Sliding bushing set select rod with 15 holes Elastic pin φ10*45 Cross recessed countersunk head screw M5*10 Hexagon socket countersunk head screws M6*25 Hexagon socket countersunk head screws M8*20 Hexagon socket countersunk head screws...
Page 19
Weight stack label instructions 1 Wipe front surface of weight stack 2 Peel off back sheet adhesive side from label and make sure that the label remains attached to the application tape 3 Aline the center hole of label with the weight stack center hole 4 Line up the first label to hole on top plate 5 Make sure label is straight and slowly press into place...