Remote Control Buttons; Control The Receiver - Dish Network Platinum Plus 121150 User Manual

To set the remote back to control the TV volume:
1. Press and hold the TV mode button
for three seconds, and then let go of it. The TV mode
button will blink.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME
button.
4. Press the 0 number button.
5. Press the POUND (#) button.
The TV mode button flashes three times.
6. Press the SAT mode button.
7. Press the plus (+) and minus (-) sides of the VOLUME
button.
The TV's volume changes and the TV mode button lights
instead of the AUX mode button.
R C
EMOTE
C
ONTROL THE
S
Press this button to set the remote to SAT ("satellite") mode to control
the receiver. The SAT mode button's back light stays lit for about two
seconds to show you've set the remote to SAT mode. Make sure you
keep the remote in SAT mode to use the buttons we tell you
about here.
121150
B
ONTROL
R
ECEIVER
M B
AT ODE
UTTONS
UTTON
11