What To Do When The Lights Flash; Checking Projector Status - Epson PowerLite 1810p User Manual

To select how often EMP Monitor checks the status of
projectors, follow the steps below:
1. From the Tool menu, select
this screen:
2. Enter the desired Update interval and click
Note: If you want EMP Monitor to run whenever you start your
computer, click
Register at startup
Understanding the Notification Messages
If a projector experiences a problem, EMP Monitor sends an e-
mail message to each of the addresses you entered in the Set
mail notification function window. The subject line of the
message includes the projector's display name, shown in EMP
Monitor, and the warning/error. The body of the message
contains the projector's display name in EMP Monitor and the
error/warning message. When the problem has been fixed, EMP
Monitor sends a message indicating the problem has been
resolved.
Note: If a projector develops a critical problem, it may not be
possible for it to report the error.

Checking Projector Status

If your projector isn't working correctly, first turn it off, wait for
it to cool (the light stops flashing orange), and unplug it.
Power
Then plug the power cord back in and turn on the projector. If
this doesn't solve the problem, check the lights on top of the
projector.
. You see
Environment Setup
.
OK
.

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status.
Power light
Lamp light
The following table describes the projector's status lights.
Status lights
Light Status
Orange
Flashing
green
Green
Flashing
orange
Red
Flashing
orange
3/08
PowerLite 1810p/1815p
Temperature light
Description
The projector is in sleep or standby
mode. You can unplug it or press the
P Power button to turn it on.
The projector is warming up. Wait for the
image to appear.
The projector is operating normally.
The projector is cooling down. You can't
turn it back on until the light stops
flashing and remains orange.
There is a problem with the projector.
Check the other two lights and the
information on this page to diagnose the
problem.
Rapid cooling is in progress. Although
this is not an abnormal condition,
projection will stop automatically if the
temperature rises higher. Make sure
there is plenty of space around and under
the projector for ventilation, and that the
air filter and vents are clear.
PowerLite 1810p/1815p 23
-