Download Print this page

Advertisement

PowerLite
®
1810p
Multimedia Projector
User' s Guide

Advertisement

   Related Manuals for Epson PowerLite 1810p

   Summary of Contents for Epson PowerLite 1810p

  • Page 1

    PowerLite ® 1810p Multimedia Projector User’ s Guide...

  • Page 2: Important Safety Information

    Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...

  • Page 3: Table Of Contents

    Contents Welcome ........7 Using Your Documentation .

  • Page 4

    Turning Off the Picture and Sound ....29 Stopping Action....... 30 Zooming Part of Your Image .

  • Page 5

    Disabling the Projector’s Buttons ....59 Customizing Power and Operation....60 Multi-screen Color Adjustment .

  • Page 7: Welcome

    Welcome ® he PowerLite 1810p is an easy-to-use projector that weighs less than 7 pounds. The projector offers up to 3500 lumens of brightness. You can connect it to a wide range of computers and video sources. Easy setup, control, and security: ®...

  • Page 8: Using Your Documentation

    If you still need help after checking this User’s Guide and the ■ sources listed above, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the PrivateLine card. Or take advantage of Epson’s automated support services 24 hours a day.

  • Page 9: Registration And Warranty

    Canada, usually via overnight delivery. See the brochure included with your projector for details. To register, simply fill out the registration card and mail it to Epson. Or you can register online at epson.com/webreg. Registering also lets you receive special updates on new accessories, products, and service.

  • Page 10: Unpacking The Projector

    To receive an S-video signal, you’ll need an S-video cable. ■ To receive a component video signal from a VCR or other video ■ device, you’ll need an HD15 to component video cable. You can purchase these items from Epson. See “Optional Accessories” on page 11. Welcome...

  • Page 11: Optional Accessories

    Optional Accessories To enhance your use of the projector, Epson provides the following optional accessories: Product Part number Replacement lamp V13H010L40 Air filter replacement set (2 filters) V13H134A08 Universal ceiling mount ELPMBUNI False ceiling plate ELPMBFCP Security bracket/cabling for gyro lock mounts...

  • Page 12

    Welcome...

  • Page 13: Displaying And Adjusting The Image

    Displaying and Adjusting the Image hether you’re presenting from a computer or video equipment, you need to follow some basic steps to display your image on the screen. Follow the guidelines in this chapter for: Positioning the projector ■ ■ Turning on and off the projector ■...

  • Page 14: Positioning The Projector

    Positioning the Projector note You can mount the projector If the projector isn’t already installed in the room you’re using, you’ll on the ceiling, or place it probably want to place it on a table in front of the screen, as shown. behind a translucent screen This lets you stand in the front of the room, face the audience, and for rear projection.

  • Page 15: Turning On And Off The Projector

    ® MicroSaver anti-theft device to the lock port on the projector. You can purchase this from Epson; see page 11 Projector Screen If you place the projector below screen level, you’ll have to tilt it up by extending the front adjustable foot. This causes the image to become “keystone”...

  • Page 16

    Follow these steps to turn on the projector: 1. Open the A/V mute slide (lens cover). note You can set the projector to automatically turn off the projector lamp and enter “sleep mode” when it has not received any signals for 30 minutes.

  • Page 17: Using The Direct Power On Function

    3. Press the P button on the remote control or on top of the Power projector. warning The projector beeps once and the light flashes green as the Power Never look into the lens projector warms up, then an image begins to appear. When the when the lamp is on.

  • Page 18: Shutting Down The Projector

    You can also use the buttons on the remote control to switch Source between devices connected to the ports identified on each button. The PowerLite 1810p does not support EasyMP. Displaying and Adjusting the Image...

  • Page 19: Troubleshooting Display Problems

    Troubleshooting Display Problems Follow these guidelines if you’re having trouble displaying an image. You Can’t Project an Image If you don’t see the image you are trying to project, try the following: ■ Make sure the cables are connected correctly, as described beginning on page 35.

  • Page 20

    If the function key doesn’t permit you to display simultaneously ■ on both screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the utility.

  • Page 21: Adjusting The Image

    Adjusting the Image Once you see your image, you need to make certain adjustments: ■ If the image is too high or too low, reposition it as described below. ■ To focus or zoom your image, see page 22. ■ If the image isn’t square, see page 22.

  • Page 22: Focusing And Zooming The Image

    Focusing and Zooming the Image Turn the focus ring on the projector to sharpen the image. Turn the zoom ring on the projector to reduce or enlarge the image. Focus Zoom If the image still isn’t large enough, you may need to move the projector farther away from the screen.

  • Page 23

    You see a projected message: 2. Aim the projector so the message appears near the middle of the screen. Then use the zoom ring to enlarge the image so the white frame (not shown above) extends beyond the edges of the screen on all sides.

  • Page 24

    You see this screen: 5. Use the pointer button on the remote control (or the arrow buttons on the projector) to select the corner you want to adjust, and press Enter 6. Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape.

  • Page 25: Selecting The Color Mode

    You can manually adjust the shape of the image to compensate for vertical and horizontal keystone distortion. First make sure the note Keystone setting in the projector’s menu system is set to H-Keystone The projector’s arrow V-Keystone buttons may already be in Keystone correction mode if 1.

  • Page 26: Resizing Video Images

    Press the button on the remote control, and then select Color Mode from one of these options: For making color presentations in a bright room. ■ Presentation: For making black-and-white presentations in a bright ■ Text: room. For watching movies in a darkened room; gives images a ■...

  • Page 27: Presenting With The Remote Control

    Presenting with the Remote Control he projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 20 feet away. You can use the remote control to adjust the picture and sound note (page 28) or as a pointer to highlight your presentation (page 31).

  • Page 28: Using The Remote Control

    Using the Remote Control note If a button is pressed longer Make sure batteries are installed as described on page 70. Follow these than 30 seconds, the remote tips for using the remote control: control stops operating to conserve power. When you Point the remote control at the front of the projector or at the ■...

  • Page 29: Turning Off The Picture And Sound

    After you select a source, the screen goes dark for a moment before the image appears. Turning Off the Picture and Sound You can temporarily turn off the image and sound when you want to redirect your audience’s attention. There are two ways to do this: ■...

  • Page 30: Stopping Action

    Stopping Action You can use the remote control to stop the action in your video or note computer image. This function pauses the image, not the sound. To stop the action and keep the current image on the screen, press ■...

  • Page 31: Controlling The Volume

    Controlling the Volume To change the volume, press the button on the remote note control. To temporarily shut off the sound and picture, press the button or close A/V Mute the A/V mute slide. You can also adjust the volume using the projector’s menu system. See page 54.

  • Page 32: Customizing The Pointer Tool

    3. When you’re done using the pointer, press to clear the screen. Customizing the Pointer Tool You can change the appearance of the pointer by choosing from three alternative shapes. 1. Press the button on the remote control, highlight the Menu menu, highlight , and press...

  • Page 33: Setting The Projector Id

    Use the pointer button to move the pointer on the screen. ■ ■ Press the button once to left-click, or press it twice to Enter double-click. Press the button to right-click. To drag-and-drop, hold down the button. Then use the ■...

  • Page 34: Setting The Remote Control Id

    4. When done, press to exit the menu system. Menu Setting the Remote Control ID The remote control’s default ID is zero. This lets you operate any note projector. To set it to operate a specific projector, follow these steps: If you’re using a remote control ID other than the 1.

  • Page 35: Connecting To Computers And Other Equipment

    Connecting to Computers and Other Equipment his chapter tells you how to connect the projector to a notebook or desktop computer, and/or to video equipment, such as a VCR, DVD player, or video camera. Follow the instructions in this chapter on: Connecting to a computer ■...

  • Page 36: Connecting To A Computer

    Connecting to a Computer You can connect the projector to any computer that has a standard video output (monitor) port, including desktop models, PC notebook computers, MacBook, PowerBook, and iBook computers, and hand-held devices. If you want to use the projector’s remote control as a wireless mouse to operate your computer during presentations, see page 37.

  • Page 37: Connecting The Cable For Remote Mouse Control

    4. When you’ve finished making any connections, see page 15 for instructions on turning on the projector and adjusting the image. Connecting the Cable for Remote Mouse Control If you’ve connected a computer as described in this chapter (using port), you can use the projector’s Computer 1 Computer 2 remote control as a wireless mouse.

  • Page 38: Connecting To Video Equipment

    Connecting to Video Equipment You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: RCA connector (composite video) ■ If your video player has a yellow RCA-style video output connector, see “Connecting a Composite Video Source”...

  • Page 39: Connecting A Composite Video Source

    Connecting a Composite Video Source 1. Locate an RCA-style video cable (one is usually provided with your video equipment or you can purchase one from an electronics dealer). 2. Connect the cable to the yellow video output connector on your player and the yellow connector on the projector: Video...

  • Page 40: Connecting An S-video Source

    Connecting an S-Video Source 1. Locate an S-video cable (one is usually provided with your video equipment or you can purchase one from Epson; see page 10). 2. Connect the cable to the S-video connector on your player and connector on the projector: S-Video 3.

  • Page 41: Connecting A Component Video Source

    You will need a special cable to connect your component video equipment to the HD15 (VGA-style) connector on the projector. You can order the HD15 to component cable (ELPKC19) from Epson; see page 11 for more information. 1. Locate an HD15 to component video cable or adapter.

  • Page 42: Connecting An Rgb Video Source

    Connecting an RGB Video Source 1. Locate the VGA computer cable provided with the projector. note 2. Connect the cable to the video port on your player and Be sure your video player is port on the projector. Computer1 Computer2 not a component video source.

  • Page 43: Connecting An External Monitor

    Connecting an External Monitor If you want to monitor your computer presentation close-up (on a monitor placed beside the projector) as well as on the screen, you can note connect an external monitor. You can use it to check on your The monitor cannot display presentation even if you’ve pressed the button or switched...

  • Page 44: Playing Sound Through The Projector

    Playing Sound Through the Projector You can play sound through the projector’s speaker system or attach an external speaker system. To play sound through the projector, follow these steps: 1. Locate the appropriate cable and connect it to the jack on Audio the projector.

  • Page 45: Connecting External Speakers

    Connecting External Speakers You can output sound to external speakers with built-in amplifiers. When you play sound through external speakers, the projector’s built-in speaker system is disabled. 1. Locate the appropriate cable to connect your speakers. Depending on your speakers, you may be able to use a commercially available audio cable with a stereo mini-jack connector on one end and pin jacks on the other end.

  • Page 46

    Connecting to Computers and Other Equipment...

  • Page 47: Fine-tuning The Projector

    Fine-Tuning the Projector ou can use the projector’s on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system Adjusting the image ■ Adjusting signal settings ■ ■ Customizing projector features Using the projector security features ■...

  • Page 48: Using The Menu System

    Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the button on the Menu remote control or on the projector. You see a menu screen similar to the one below: Options Menu list...

  • Page 49: Restoring The Default Settings

    4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may have to press the button to view a sub-screen for changing Enter the setting. Press the left or right side of the pointer button to adjust ■...

  • Page 50: Adjusting The Image

    Adjusting the Image You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. 1. Press the button on the projector or remote control and Menu select the menu. You see the Image menu screen. Image 2.

  • Page 51: Six-axis Color Adjustment

    For matching the color palette of standard sRGB sRGB: computer displays. : For projecting accurate colors on a green Blackboard chalkboard (adjusts the white point). note For manual color adjustment (see below). Customized: setting Brightness ■ Brightness changes the opacity of the projector’s LCD panels.

  • Page 52: Adjusting Signal Settings

    2. Press the button to select , then press Enter Customized return to the Image menu. 3. Select and press . You see hue and Color Adjustment Enter saturation controls on the screen for six colors: (red, RGBCMY green, blue, cyan, magenta, and yellow). 4.

  • Page 53

    2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Auto Setup Leave this setting to automatically optimize computer images. Turn it off if you want to save adjustments you have made to the Tracking, Sync, and Position settings. note You can also use the remote ■...

  • Page 54: Customizing Projector Features

    Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, adjust audio volume, and customize several other features. ■ Keystone Adjusts the shape of the image if the projector has been tilted upward or placed at an angle to the screen. Select to correct horizontal and vertical keystone H/V-Keystone...

  • Page 55: Using The Projector Security Features

    ■ Remote Receiver Deactivates the projector’s front and/or back sensors that detect signals from the remote control. Use this setting to prevent use of the remote control or to stop interference from bright fluorescent lights. ■ Test Pattern Displays a test pattern for use when adjusting the zoom and focus, and when performing keystone correction.

  • Page 56

    You see this screen: note Network Protect is not available for the 1810p projector. 2. Use the pointer button to select and press Password Enter 3. When you see a message asking if you want to change the Hold down password, select and press Enter...

  • Page 57: Creating Your Own Startup Screen

    If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson to unlock it. If you have forgotten the password, contact Epson with the request code number that appears in the Password screen for assistance. See “Where To Get Help”...

  • Page 58: Capturing The Image

    Capturing the Image Start by displaying the image you want to use from either a computer or video source, such as a DVD player. Then follow these steps to capture the image and transfer it to the projector: note 1. Press the button on the remote control, highlight the Menu When you choose an image...

  • Page 59: Disabling The Projector's Buttons

    Choosing When to Display the Image After your image is saved, you can set it to display as the startup screen, the screen you see when there’s no signal, or the screen you see when you press the button (see page 29). A/V Mute 1.

  • Page 60: Customizing Power And Operation

    Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable quick startup, turn sleep mode on or off, and customize other projector operations. ■ Display Use this setting to turn off the display of messages, change the background color, enable logo display, or turn off the startup screen display.

  • Page 61

    If Direct Power On is enabled, the power cable is ■ Standby Mode connected, and a power This function is not used for the PowerLite 1810p. outage occurs, the projector will start when the power is ■ Projector ID restored.

  • Page 62: Multi-screen Color Adjustment

    Multi-screen Color Adjustment You can match the color of projected images when two or more projectors are being used to display images near each other. For each screen, you can set five levels of brightness and color correction. note 1. Before starting, you may want to assign a numeric ID to each If you use two or more projectors side-by-side, projector.

  • Page 63: Maintaining The Projector

    Maintaining the Projector our projector needs little maintenance. All you have to do is keep the lens clean and periodically clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. warning The only parts you should replace are the lamp and air filter.

  • Page 64: Cleaning The Lens

    Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. Use a canister of compressed air to remove dust. To remove dirt or smears on the lens, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens.

  • Page 65: Cleaning The Air Filter And Vent

    4. If the dirt is difficult to remove or the filter is broken, replace the filter as described on page 68. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766) to obtain a new filter. Maintaining the Projector...

  • Page 66: Replacing The Lamp And Air Filter

    The lamp warning light flashes red (the lamp is burnt out). ■ Lamp warning light Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L40. Maintaining the Projector...

  • Page 67

    Follow these steps to replace the lamp and air filter: warning 1. Turn off the projector and unplug the power cord. Let the lamp cool fully 2. Let the projector cool for at least an hour (if it has been on). The before replacing it.

  • Page 68

    5. Hold the lamp as shown and pull it straight out. note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 6. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.) 7.

  • Page 69: Resetting The Lamp Timer

    Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menus. 1. Press the button on the remote control or on the Menu projector’s control panel. You see the main menu. 2.

  • Page 70: Replacing The Batteries

    The life span of the lamp is about 2500 hours if the Brightness setting in the Settings menu is set to (default), and Control High 3000 hours if the setting is set to . Make Brightness Control sure you have a spare lamp handy if the usage hours on this menu are close to the life span of your lamp.

  • Page 71: Transporting The Projector

    Transporting the Projector The projector contains many glass and precision parts. Follow these note guidelines to prevent damage: Epson shall not be liable for any damages incurred When shipping the projector for repairs, use the original ■ during transportation. packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector.

  • Page 72

    Maintaining the Projector...

  • Page 73: Solving Problems

    Solving Problems his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. The following information is included: ■ Using the projector’s on-screen help system What to do when the projector’s status lights flash ■...

  • Page 74: Using On-screen Help

    Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the button on top of the projector or on ? Help the remote control. 1. Press the button on the remote control or on the ? Help projector.

  • Page 75: Checking Projector Status

    Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool (the light stops flashing orange), and unplug it. Then Power plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector.

  • Page 76

    If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or temperature sensor. Contact Epson for help as described on page 83. Warning: Except as specifically explained in this User’s Guide, do not attempt to service this product yourself.

  • Page 77: Solving Projector Operation Problems

    The power cable may be defective. Disconnect the cable from the ■ outlet and contact Epson as described on page 83. Check to see if the A/V mute slide (lens cover) is closed. ■...

  • Page 78

    If you are projecting from a DVD player or other video source, ■ make sure you turn it on and press its button. Play You’ve connected a computer and see a blue screen with the message displayed. No Signal Make sure the cables are connected correctly, as described on ■...

  • Page 79

    The message is displayed. Not Supported ■ Make sure the correct input signal is selected in the Signal menu (see page 52). Make sure your computer’s resolution doesn’t exceed UXGA ■ × (1600 1200) and the frequency or refresh rate is supported by the projector (see page 91).

  • Page 80

    The image contains static or noise. ■ If you’re using a computer cable longer than 6 feet, or an extension cable, the image quality may be reduced. Keep your computer and video cables away from the power cord ■ as much as possible to prevent interference. The video signal may be split between the computer and the ■...

  • Page 81

    You see vertical bands or the image still looks blurry after trying the solutions in the previous section. note If you’re projecting from a computer and displaying an image that ■ You must be projecting an contains a lot of fine detail, you may notice vertical bands or some image for this button to have of the characters may look heavy or blurred.

  • Page 82

    Try adjusting the settings on the Image ■ Brightness Contrast menu. Check your computer display settings to correct the color balance. ■ The projector’s lamp may need to be replaced. See page 66 for ■ instructions. Make sure the correct input signal is selected in the Signal menu ■...

  • Page 83: Solving Problems With The Remote Control

    Where To Get Help Epson provides these technical support services: Internet Support Visit Epson’s support website for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Visit Presenters Online to access tips, templates, and training for developing successful presentations.

  • Page 84: Speak To A Support Representative

    Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free.

  • Page 85: Purchase Supplies And Accessories

    Description of the problem ■ Purchase Supplies and Accessories You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

  • Page 86

    Solving Problems...

  • Page 87: Projector Installation

    Projector Installation his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room. The projector can be installed for four different viewing setups: front projection, ceiling projection, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown: Front projection Rear projection...

  • Page 88

    ■ The security slot is compatible with Kensington security slot the MicroSaver security systems manufactured by Kensington. You can purchase this lock from Epson (see page 11). Kensington security slot Security cable attachment In addition, the projector includes several menu-operated security features.

  • Page 89: Technical Specifications

    Technical Specifications General Type of display Epson poly-silicon TFT active matrix Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 16.8 million colors Brightness 3500 lumens (High Brightness mode) 2700 lumens (Low Brightness mode) Contrast ratio 500:1 Image size...

  • Page 90: Projection Lamp

    Projection Lamp note Type UHE (Ultra High Efficiency) Lamp life results will vary Power consumption 210 W depending upon mode selected, environmental Lamp life Approx. 2500 hours (High Brightness conditions, and usage. mode) Approx. 3000 hours (Low Brightness mode) Turn off this product when Part number V13H010L40 not in use to prolong the life...

  • Page 91: Safety And Approvals

    To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector. Some images are automatically resized using Epson’s SizeWize technology to display in the projector’s native format (XGA).

  • Page 92

    Compatible video formats Mode Refresh Rate (Hz) Resolution × VGA EGA × VGA—60 × VESA—72 × VESA—75 × VESA—85 × VGA—120 × SVGA—56 × SVGA—60 × SVGA—72 × SVGA—75 × SVGA—85 × SVGA—120 × XGA—60 1024 × XGA—70 1024 × XGA—75 1024 ×...

  • Page 93

    Compatible video formats (continued) Mode Refresh Rate (Hz) Resolution NTSC — NTSC 4:43 — — N-PAL — M-PAL — PAL—60 — SECAM — HDTV (720p) — HDTV (720p) — HDTV (1080i) — HDTV (1080i) — TV480i — TV625i — SDTV (480p) —...

  • Page 94

    Technical Specifications...

  • Page 95: Notices

    Notices his appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not look into the lens when the projector is on. The bright light can damage your eyes.

  • Page 96

    ■ Do not operate the projector in a closed-in cabinet unless proper ventilation is provided. ■ If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation. ■...

  • Page 97: Fcc Compliance Statement

    ■ If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from falling into your eyes when you open the lamp cover. WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm.

  • Page 98: For Canadian Users

    For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada. Notices...

  • Page 99: Index

    Index A/V Mute Cables button, 29 HD15-to-component, 10, 41 display settings, 59 illustrations, 10 Accessories, 11 mouse, 37 Air filter ordering, 11 cleaning, 65 remote control cable set, 11 ordering, 11 security, 88 replacing, 66 to 68 S-video, 11, 40 Altitude, 61, 76, 91 VGA, 36 Anti-theft device, 11, 15, 88...

  • Page 100

    66 to 69 Help, 83 to 85 specifications, 90 Help system, using, 74 status light, 75 to 76 Help, Epson, 8 Lamp timer, resetting, 69 High altitude, 61, 76 Language setting, 61 Laptop computer connecting to, 36 to 37...

  • Page 101

    Power button, 17 specifications, 90 display problems, 78 status light, 17, 75 to 76 Manuals, 8 Presentation color mode, 26, 50 Menus Presentations changing settings, 48 to 49 computer, 36 to 37 default settings, restoring, 49 room conditions, 14, 28 Image, 50 to 51 tips and training, 9 Info, 69 to 70...

  • Page 102

    Security cables, 88 Quick Corner, 23, 54 identifying logo, 58 to 59 Kensington lock, 11, 88 Operation Lock, 59 password protection, 55 to 57 Raising image, 21 Sharpness setting, 51 Rear-screen projection, 60, 87 Signal menu, 52 to 53 Registration, 9 Six-axis color adjustment, 51 to 52 Remote control Sleep mode, 16...

  • Page 103

    Test pattern, displaying, 55 Wireless, mouse, 32, 37 Text color mode, 26, 50 Theatre color mode, 26, 50 Tint setting, 51 Zoom ratio, 89 Tracking, adjusting, 81 Zooming image, 22, 30 Transporting projector, 71 Troubleshooting blank screen, 19 to 20, 77 to 78 cut-off image, 79 distorted image, 22 to 25 image and sound problems, 77 to 82...

  • Page 104

    Index...

Comments to this Manuals

Symbols: 0
Latest comments: