Epson PowerLite 1810p User Manual page 8

PowerLite 1810p/1815p
Turning Off the Picture and Sound
You can temporarily turn off the image and sound when you
want to redirect your audience's attention. There are two ways
to do this:
❏ Press the
button on the remote control. This
A/V Mute
turns the image off and stops the sound. To turn the image
and sound back on, press the button again.
❏ Close the A/V mute slide, as shown below:
Stopping Action
To stop the action and keep the current image on the screen,
press the button. The sound continues.
Freeze
To restart it, press the
Freeze
Zooming Part of Your Image
1. Press the button on the remote control.
E-Zoom
You see a crosshair indicating the center of the zoom-in area.
8 PowerLite 1810p/1815p
-
button again.
2. Use the pointer button to position the crosshair.
3. Continue pressing the
selected area up to 4 times.
4. While the image is enlarged, you can:
❏ Use the
pointer button to move around the screen.
❏ Press the
E-Zoom
5. When done, press the Esc button to return the image to its
original size.
Controlling the Volume
To change the volume, press the
remote control or projector. You can also adjust the volume
using the projector's Setting menu.
Operating Your Computer with the
Remote Control
If you connect a computer to the projector with a USB cable,
you can use the remote control in place of your computer's
mouse. This gives you more flexibility when delivering
slideshow-style presentations, since you won't have to stand
next to the computer to change slides.
❏ Use the
and
Up
Microsoft PowerPoint
®
Page up or down
to change slides
in PowerPoint
❏ Use the
pointer button to move the pointer on the
screen.
❏ Press the
button once to left-click, or press it twice to
Enter
double-click. Press the
❏ To drag-and-drop, hold down the
the pointer button to drag the object. When it's where
you want it, release the
3/08
button to enlarge the
E-Zoom
button to zoom out.
or button on the
buttons to move through a
Down
slideshow.
®
Use to move
pointer on
screen
Left-click
Right-click
button to right-click.
Esc
button. Then use
Enter
button.
Enter