Monitoring Your Projectors - Epson PowerLite 1810p User Manual

4. Select the projector you want to add by clicking its name,
then click the button. You see this screen:
Edit
5. Enter a Display name and select a Display icon. Select a
Parent group (if necessary) then enter a Monitor Password (if
necessary) and a Description for the projector. Click the
button. To register additional projectors with EMP
Register
Monitor, repeat steps 2 through 5.
6. When you're done adding projectors, click
a screen with a list of all registered projectors:
Note: If the projector is not automatically found, it may not be
connected or configured correctly for the network. To delete a
projector from the list, right-click the projector name, and click
Delete

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
This lets you see which projectors are currently being used,
from which source (or port) they are projecting an image, and if
a problem occurs.
For detailed status information, right-click the projector in
question and click
status icons shown on the EMP Monitor screen.
Group status icons
Type status icons
. You see
Cancel
3/08
PowerLite 1810p/1815p
.
. The following tables describe the
Property
No warnings or problems. All projectors in
the group are operating normally.
Warning or problem. A projector in the
group has a warning or problem.
Monitoring disabled. Right click the icon
and select
Monitoring Enabled
monitoring the group.
Data is currently being updated.
No warnings or problems.
Warning or problem.
Monitor Password error. No monitor
password was entered when the projector
was registered, or an incorrect password
was entered.
Monitoring disabled. Right-click the icon
and select
Monitoring Enabled
monitoring the projector.
Data is currently being updated.
Network error (for example, the projector is
not connected to the network, or the
power cable is disconnected).
You may also see this error if
is selected in Standby Mode.
Network error (Esc/VP.net communication
error).
PowerLite 1810p/1815p
to begin
to begin
Network Off
21
-