Summit SP7D2 Owner's Manual page 10

Notice:
Drawer adjustments are made by moving the slide that carries the drawer's rail. Minor
adjustments may be made by loosening one of the slide's mounting screws, adjusting the slide
and retightening the screw. Major adjustments may be made by removing the slides' mounting
screws, drilling new mounting holes and remounting the slide.
SIDE-TO-SIDE ADJUSTMENT
The drawer will need a Side to-Side Adjustment if, when viewed from the top, the drawer front is not
square with the sides of the cabinet. This is caused by one of the slides being mounted too far forward on
the unit's liner.
Minor Adjustment:
Note: The mounting holes on the slide are slightly larger than the screws' diameter.
1. Loosen the slide's mounting screws.
2. Push the slide backward.
3. Retighten the screws.
Major Adjustment:
Note: The slides have extra mounting holes that may be used.
9