Car Setup; Steering Wheel Setting; Installation Setup; Sources Setup - Alpine ILX-F903T6R Manual

Car Setup

[Car] is selected on the General Setup Menu screen in step 1. See
"General Setup" (page 27).

Steering wheel Setting

Set this item when Apple CarPlay is used/Android smartphone which
installed Android Auto App is connected.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Steering wheel
Setting contents:
Left (Initial setting) / Right

Installation Setup

Vehicle Setup enables you to check the connection status of Reverse
Lead/Parking Brake Lead.
Setting item:
Installation Status
The Installation check screen is displayed.

Sources Setup

[Sources] is selected on the Setup main screen in step 3. See "Setup
Operation" (page 24).
Sources Setup Menu screen
<Setting items>
Radio
PI Seek
RDS Regional
PTY Language
PTY31
FM Tuner Setting
DAB
Alarm
Announcement Mode
FM Linking
DAB Antenna Power
1
AUX*
2
AUX Name*
2
Signal*
3
HDMI*
4
Apple CarPlay*
*1 This setting cannot be changed while the AUX source is being selected.
*2 This setting is only available when "AUX" is set to "On" (
*3 This setting cannot be changed while the HDMI source is being
selected.
*4 This setting cannot be adjusted when an iPod/iPhone is connected or
Apple CarPlay/iPod source is being selected.
The following steps 1 to 3 are common to each "Setting
item" of Audio Setup. See each section for details.
1
Select the desired item.
2
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes "Off" ( ) or "On" (
• If " " appears, there is a further hierarchy. Touch the desired
item.
3
Touch [ ] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see "About Basic Operation for List
Screen" (page 14).
).
).
37
-EN