Getting Started; Location Of Controls; Turning Power On Or Off; Turning The System On - Alpine ILX-F903T6R Manual

Getting Started

Location of Controls

RESET switch
The system of this unit is reset.
/ (DOWN/UP) button
Press to adjust the volume.
(MUTE) button
Press to activate/deactivate the mute mode.
button
Depending on the connected smartphone, press to recall Siri
function or voice recognition mode.
(MENU)/(Power Off) button
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn the
power off.
(Favourite) button
Recall the Favourite screen.
Press and hold for at least 2 seconds to recall the Vehicle Info
mode screen. (CAN-I/F BOX should be connected.)
/ button
Press to seek up/down a station in radio mode or up/down a
track, chapter, etc., in other audio/visual sources.
Dimmer Sensor
Sense the brightness of the car interior.
About the button descriptions used in this Owner's
Manual
The buttons found on the face of the unit are expressed in bold
(e.g. MENU). The buttons found on the touch-screen display are
shown in bold within brackets, [ ] (e.g. [

Turning Power On or Off

Some of this unit's functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
2
• The unit can be turned on by pressing any button.
• The unit is a precision device. Careful handling of the unit should

Turning the System On

With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 23 languages.
After selecting the language, the time setting screen is displayed.
Touch [ ] or [ ] of "Hour", "Minute" to adjust the time, then
touch [OK] to confirm.
Touch [Reset] to reset the time.
• The GPS antenna should be connected before adjusting the time.
• Some of this unit's functions cannot be performed while the vehicle is in
]).
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last screen that was
displayed before the ignition key was turned off. For example, if
the unit is in radio mode when ignition is turned off, it will remain
in radio mode when ignition is turned back on.
Press and hold the (MENU)/(Power Off) button for at
least 5 seconds to turn the power off.
provide you with years of trouble-free operation.
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake before attempting these operations.
11
-EN