Before First Use; Daily Use; Loading The Laundry - Electrolux EWF12935S User Manual

14 www.electrolux.com
4.

BEFORE FIRST USE

NOTE
During installation or before first use you
may observe some water in the machine.
This is a residual water left in the
machine after a full functional test in the
factory to ensure the machine is
delivered to customers in perfect working
order and is no cause for concern.
1. Ensure that the electrical and water
connections comply with the
installation instructions.
5.

DAILY USE

5.1 Loading The Laundry

1. Turn the water tap on.
2.
Connect the main plug to the main
socket.
3. Turn the knob to set a program. The
washing machine will propose a
temperature and automatically select
the spin value provided for the
program you have chosen.
The selector knob can be turned either
clockwise or anticlockwise.
Position "Off" to reset program/
switching OFF the machine.
At the end of the program the selector
dial must be turned to position "Off", to
switch the machine off.
4. Check and remove objects (if there
are any) that could be trapped in the
fold.
Put 2 litres of water in the detergent
2.
compartment for washing phase. This
activates the drain system.
3. Select a Cottons cycle at 90 °C,
without any laundry in the machine, to
remove any manufacturing residue
from the drum and tub then start the
machine.
5. Place the laundry in the drum, one
item at a time, shaking them out as
much as possible. (Refer to page 18
"WASHING HINTS")
6. Close the door.
CAUTION
Make sure that no laundry
remains between the seal and
the door.