Cleaning The Water Inlet Filter - Electrolux EWF12935S User Manual

Table of Contents

Advertisement

Available languages

Available languages

5. Pull back the drainage duct and turn
the filter counter-clockwise to
remove it.
1
2
6. Remove fluff and objects from the
pump (if there are any).
7. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
8.
Clean the filter under the water tap.
9.
Put the filter back in the pump into
the special guides. Make sure that
you correctly tighten the filter to
prevent leakages.
10. Put the flap back and close the
drain pump door.
8.8
Cleaning The Water Inlet
Filter
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged. It is therefore
a good idea to clean it from time to time.
To clean the water inlet filters:
1.
Close the water tap.
2.
Remove the water inlet hose from
the water tap.
Clean the filter in the inlet hose with
3.
a stiff brush.
ENGLISH
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewf12933Ewf12033

Table of Contents