Print Settings - Epson Stylus Pro XL Setup And Software Manual

Print Settings

The following settings control the resolution, media type, and
print options.
Resolution
Specifies the resolution to be 720 dpi, 360 dpi, or 180 dpi.
Resolution is the amount of detail used to create an image.
The higher the resolution, the sharper and finer the image.
For the best possible resolution, choose
you select this resolution, MicroWeave is automatically turned
on and High Speed mode is turned off. For best results at
720 dpi, load EPSON special coated paper or 720 dpi or
high-quality glossy paper.
as the Media Type-described in the next section-if you load
highquality glossy paper.)
For most color printing, select
produces good-quality, full-color images using less memory
and in less time than 720 dpi. For best results at 360 dpi, use
EPSON special coated paper for 360 dpi.
When speed is important and draft quality is good enough, use
Draft - 180 dpi
Note:
Printing at lower resolutions also conserves ink.
(Be sure to
Best -360 dpi.
resolution.
Installing and Using the Printer Driver
Super -720 dpi.
select
HQ Glossy Paper
This resolution
When
2-11