Defining Custom Paper Sizes - Epson Stylus Pro XL Setup And Software Manual

Select the orientation of the image on the page by clicking one
of the following buttons:
In portrait orientation, the top of the page is parallel with the
short edge of the paper. In landscape orientation, the top of the
page is parallel with the long edge of the paper.
Note:
Print speed varies depending on the orientation setting in the driver.
It is best to select the image orientation using your application, not
the driver.
To reduce or enlarge the image, click the
box and enter a percentage.

Defining custom paper sizes

To define a custom paper size, follow these steps:
1. Doubleclick the
2. Click New. This creates a new paper size based on the
currently selected one.
3. Enter a new name for the paper size in the New Paper Size
box. Then enter the correct values in the
boxes. Click
measurement units, if necessary.
4. Click OK
Setup dialog box.
button on the Page Setup dialog box.
Paper
Inches or cm
to save the new paper size and return to the Page
Installingand Using the Printer Driver
Reduce or Enlarge
Width
(centimeters) to change the
and
Height
2-15