Epson Stylus Pro XL Setup And Software Manual page 13

outlets. Avoid using outlets on the same circuit as
photocopiers or air control systems that regularly switch
on and off.
total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating.
Also, make sure the total of all devices plugged into the
wall outlet does not exceed 15 amperes.
not attempt to service the printer yourself.
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered
the printer; if the printer has been dropped or the cabinet
damaged; if the printer does not operate normally or
exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
8 Introduction