Omron M7 Intelli IT Instruction Manual page 19

HEM-7322T-E_D_M.fm Page 17 Friday, July 27, 2018 12:03 PM
3. Using the Device
To Transfer the Data
After the measurement is complete, you can transfer the data (measurement results
of blood pressure and pulse rate).
Notes:
• The stored data can be transferred all at once.
• The date and time settings of your smartphone will sync with the monitor when transferred.
Sync occurs if the time between smartphone and monitor differs more than 10 minutes.
• If "-/ - -:--" appears on the Date/Time display during or after measurement, the data will not be
transferred. Only the date and time settings will sync during connection with the smartphone.
1.
Open the app on your smartphone.
2.
Pull down to refresh the screen of the app and the data
transfer starts.
3.
Confirm with your monitor if the
measurement data is transferred
successfully.
When the display on the right is shown, the data is
transferred successfully.
EN
17