Advertisement
Ubee Interactive — www.ubeeinteractive.com
2.4G—When 2.4G Wi-Fi is enabled, the LED is
On. When 2.4G Wi-Fi is disabled, the LED is Off.
5G—When 5G Wi-Fi is enabled, the LED is On.
When 5G Wi-Fi is disabled, the LED is Off.
TEL1 and TEL2—The LED is On when a
telephone is on-hook. The LED flashes when a
telephone is off-hook.
BATTERY—The LED is On when the battery is
installed and is charged. The LED is Off if no
battery is installed.
WPS (top of device)—If not used, the LED is Off.
When the user pushes the WPS button or
triggers WPS via the device's web GUI, the LED
flashes white for 4 minutes until a PIN is entered
from a wireless client that wishes to connect.
After a Wi-Fi client attaches successfully, the
LED remains solid white for 5 minutes, and then
turns off.
7
Ubee DVW328 – Safety and Installation Product Insert v1.0
Back Panel Ethernet Indicators
(Color = Orange or Green):
• When an Ethernet device, such as a computer,
is connected to the device, the LED is Green
when connected at 10/100 Mbps speeds.
• When an Ethernet device, such as a computer,
is connected to the device, the LED is Orange
when connected at 1000 Mbps speeds
(Gigabit Ethernet).
• When data is being passed between the
device and the connected device, the LED
flashes.
Advertisement
