Advertisement
Ubee Interactive — www.ubeeinteractive.com
3. Connect one end of an RJ11 phone cable to
one of the TEL ports on the modem (that has
been
provisioned
for
voice
service
specified by the service provider), and
connect the other end to the phone port of the
telephone. Note: If voice service is not
provisioned through the service provider,
telephone service is not available.
4. Connect the power cord to the POWER port
on the device. Plug the other end of the power
cord into the AC wall outlet. Important: Use
only the power cord that is shipped with the
device.
4
Ubee DVW328 – Safety and Installation Product Insert v1.0
as
Advertisement
