Download Print this page

Nu-Vu SMOKE6 Manual page 13

Advertisement

and hot water followed by a thorough rinse with clean fresh water and a sanitizing agent;
wiping the interior dry will help to prevent water spotting. Water spotting and other mineral
deposits should be removed with any mild mineral removal agent as soon as they are
noticeable.
D. Leave the Smoker DOOR open by about 1" to 2" while the unit is not in use.
* * * CAUTION * * *
NUVU DOES NOT RECOMMEND the use of any strong commercial or caustic product on this
equipment. DO NOT allow any type of caustic cleaner to come into contact with any aluminum parts
(such as the Door Frame), the silicon rubber Door Gaskets, or any of the sealant in the Smoker seams and
joints. These caustic compounds may cause discoloration and/or degradation of these parts, and may
result in permanent damage. DO NOT use bleach or bleach compounds on any chromed parts; bleach
may damage chrome plating.
NOTE:
NUVU has had very good results with a product called JIFFY CLEANER. For standard cleaning simply
spray JIFFY on and wipe off. Heavily soiled areas may require a short period of soaking. This cleaner is
available through NUVU (Part #51–0002) or through your local Rochester/Midland distributor or
representative.
This page was created using BCL ALLPDF Converter trial software.
To purchase, go to
http://store.bcltechnologies.com/productcart/pc/instPrd.asp?idproduct=1
13

Hide quick links:

Advertisement

loading

Related Products for Nu-Vu SMOKE6

This manual is also suitable for:

Smoke13