Operating Instructions - Nu-Vu SMOKE6 Manual

OPERATING INSTRUCTIONS

The NUVU Smoker is designed to offer maximum flexibility for different products. Cooking time can be
pre-set or determined by the internal temperature of the product through use of the Probe attachment.
Manual Control units are equipped with our COOK-N-HOLD feature, allowing you to cook your product
at one temperature and hold it at another. This lets you finish products quickly, but still hold them at
optimum temperatures to prevent loss of moisture and resulting shrinkage.
The NUVU smoker is equipped with an internal Grease Pan to catch any drippings from your products
and to make cleaning easier. The Grease Pan can be lifted out for dumping and cleaning at the end of the
day.
Smoke is generated in the Smoke Box located on the back internal wall of the Oven, or in the optional
External Smoke Box attached to the side of the unit. This Smoke Box consists of a stainless steel chip
box inside of a stainless steel housing. To use the Smoke Box pieces of wood pre-soaked in water are
loaded into the chip box, the chip box is inserted into the housing, and the Smoke switch(s) is set to the
ON position. Heating Elements contained in the housing will heat the wood, giving off smoke. This
smoke is circulated throughout the Oven cavity by the Motor and Blower Wheel. The strength and
duration of the smoking is controlled by the amount of wood placed in the chip box and by the length of
time it is allowed to burn and the element intensity setting.
MANUAL CONTROL operation:
1) Set the POWER and FAN switches to their ON positions. Select the correct cooking temperature
for your product on the COOK control and set the 24–HOUR TIMER to at least 1 hour,
allowing the Smoker to preheat.
2) Prepare your product as outlined in your recipe. Load the prepared product into the smoker at
your convenience. After loading your product set the 24–HOUR TIMER to the desired
cooking time.
3) Set the HUMIDITY control if you wish to add moisture to your product during the processing
cycle.
This page was created using BCL ALLPDF Converter trial software.
To purchase, go to http://store.bcltechnologies.com/productcart/pc/instPrd.asp?idproduct=1
10