Table of Contents
Advertisement
Safety Information
Installation
Installation must always comply with
applicable codes, standards, laws,
and regulations.
Only a trained and licensed electrician
should perform wiring and connections
to unit.
Always use a battery operated carbon
monoxide alarm indoors and installed
according to the manufacturer's
instructions.
Connection of fuel source must be
completed by a qualified professional
technician or contractor.
The generator set must be installed and
operated outdoors only.
Fuel and vapors are extremely
flammable and explosive. No leakage
of fuel is permitted. Keep fire and
spark away.
Use only approved switchgear to
isolate generator from the normal
power source.
Verify electrical system is properly
grounded before applying power.
6
ISO000190
ISO000155a
ISO000178a
ISO000151a
ISO000525
ISO000192
ISO000237
ISO000152
Installation Guidelines For 50 Hz Air-Cooled Generator Sets
Installation must comply with all
national and local electrical building
codes.
Unit must be positioned in a manner
that prevents combustible material
accumulation underneath.
Lift point. Install lifting attachments to
this location and only locations identified
as such. Do not connect lifting device
directly to the lift point.
Comply with regulations the local
agency for workplace health and
safety has established.
Verify the generator set is installed in
accordance with the manufacturer's
instructions and recommendations.
Following proper installation, do nothing
that might alter a safe installation and
render the unit in noncompliance with
locally applicable codes, standards,
laws, and regulations.
Never connect this unit to the electrical
system of any building unless a licensed
electrician has installed an approved
transfer switch.
Do not alter construction of, installation,
or block ventilation for generator set.
ISO000218
ISO000147
ISO000532
ISO000538
ISO000539
ISO000540
ISO000150
ISO000146
Advertisement
Table of Contents
