Download Print this page
Generac Power Systems GR160 Specifications
Generac Power Systems GR160 Specifications

Generac Power Systems GR160 Specifications

Liquid cooled diesel engine generator sets

Advertisement

Quick Links

GR160
Standby Power Rating
133KW 60 Hz
FEATURES
THE SUCCESS OF GENERAC POWER SYSTEMS STARTS
WITH INNOVATIVE DESIGN AND PROTOTYPE TESTING. But
it doesn't stop there. Total commitment to component testing,
reliability testing, environmental testing, destruction and life testing,
plus testing to applicable CSA, NEMA, EGSA, and other standards,
allows you to choose GENERAC POWER SYSTEMS with the
confidence that these systems will provide superior performance.
TEST CRITERIA:
PROTOTYPE TESTED
SYSTEM TORSIONAL TESTED
ELECTRO-MAGNETIC INTERFERENCE
NEMA MG1-22 EVALUATION
MOTOR STARTING ABILITY
SHORT CIRCUIT TESTING
SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE
REGULATION. This state-of-the-art power maximizing regulation
system is standard on all Generac models. It provides optimized
FAST RESPONSE to changing load conditions and MAXIMUM
MOTOR STARTING CAPABILITY by electronically torque-
matching the surge loads to the engine.
Liquid Cooled Diesel Engine Generator Sets
SINGLE SOURCE SERVICE RESPONSE from your Generac
dealer provides parts and service know-how for the entire unit,
from the engine to the smallest electronic component.
EPA APPROVED DIESEL POWER. Your Generac power system
is manufactured using the most up-to-date diesel engine technology.
The generator set is in compliance with all EPA regulations and is
approved for operation in all 50 states including California.
LONGER ENGINE LIFE. John Deere heavy-duty diesel engines
provide long and reliable operating life.
GENERAC
TRANSFER SWITCHES AND ACCESSORIES.
Long life and reliability is synonymous with GENERAC POWER
SYSTEMS.
One reason for this confidence is that Generac
product includes its own transfer systems, accessories, and
engine controls for total system compatibility.
FULL CAPACITY OUTPUT ON ALL VOLTAGES and
AUTOMATIC START/STOP CONTROL are standard features
found on the Generac GR Series generator sets.
Prime Power Rating
126KW 60 Hz
Sound Attenuated
Skid Mounted Generator
Shown With Optional Trailer
Power Matched
JOHN DEERE 8.1T ENGINE
Turbocharged

Advertisement

loading
Need help?

Need help?

Do you have a question about the GR160 and is the answer not in the manual?

Questions and answers

Summary of Contents for Generac Power Systems GR160

  • Page 1 SHORT CIRCUIT TESTING SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION. This state-of-the-art power maximizing regulation system is standard on all Generac models. It provides optimized FAST RESPONSE to changing load conditions and MAXIMUM MOTOR STARTING CAPABILITY by electronically torque- matching the surge loads to the engine.
  • Page 2: Generator Specifications

    FUEL RETURN LINE ... 6.35 mm (0.25 in.) ELECTRICAL SYSTEM BATTERY CHARGE ALTERNATOR ... 55 Amps at 12 V STARTER MOTOR ... 12 V RECOMMENDED BATTERY ... (1) 12 Volt, 135 A.H., 4DLT GROUND POLARITY ... Negative GR160 (Fuel should conform to ASTM Spec.)
  • Page 3 GR160 OPERATING DATA GENERATOR OUTPUT VOLTAGE/KW-60HzSTANDBY 240V, 1-phase, 1.0 pf 120/208V, 3-phase, 0.8 pf 139/240V, 3-phase, 0.8 pf 277/480V, 3-phase, 0.8 pf AMPERAGE Single phase 240V Three phase 208V Three phase 240V Three phase 480V MOTOR STARTING KVA Maximum at 35% instantaneous voltage dip...
  • Page 4 4 Prong Connector 85R 16 Tires Tongue Jack Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES. * with trailer, without fuel ®...