Generac Power Systems G007144 Installation Manuallines page 9

G
WWW.ACTIVATEGEN.COM
H
J
K
L
M1 —
M2 —
N —
P
Q
1 2 in.
NPT
Installation Guidelines For 50 Hz Air-Cooled Generator Sets
•
Activation
•
•
No User Serviceable
Parts
•
•
•
•
•
•
•
Read Owner's Manual Read the manuals for an explanation of this device.
Lifting Point Install lifting attachments to this location and only
locations identified as such. Do not connect lifting device
directly to the lift point.
Pinch Point Keep hands clear of these areas when installing the front
panel or closing the roof.
Model Data Decal Decal Location—8 kVA units
Model Data Decal Decal Location—10 kVA and 13 kVA units
Fuel Data Decal Decal Location
Sound Power Level Guaranteed sound power level per Directive 2000/14/
EC. See Specifications in the owner's manual for actual
value.
Threaded Connection Fuel inlet has a 1/2 in. NPT threaded connection.
Activate the generator set before putting the unit into
operation.
Read the manual for details.
Electricity is present at various locations inside this
enclosure.
This equipment is designed for automatic operation
and may start at any time. Render the unit inoperable
before servicing.
Battery is present. Wear appropriate protective gear.
This equipment emits exhaust gases. Ensure proper
installation to prevent asphyxiation.
Do not open the enclosure. There are no user-
serviceable parts inside. Contact an IASD.
Read and understand the manual completely before
installing or operating this equipment.
Do not smoke near this equipment.
Do not allow open flames near this equipment.
Safety Information
3