Technical Data - Bosch TES 552 Series Instruction Manual

Problem
Water dripped onto the
inner floor of the appliance
when the drip tray (8) was
removed.
Display shows
Insert brewing unit
Restore the unit to its
original factory settings
("Reset").
If you are unable to solve the problem, please call the hotline.
You will find the telephone numbers at the back of these instructions.

Technical data

Power connection (voltage – frequency)
Heater wattage
Maximum static pump pressure
Maximum water tank capacity (without filter)
Maximum capacity of the coffee bean container
Length of power cable
Dimensions (H x W x D)
Weight, empty
Type of grinding unit
Cause
Drip tray (8) removed too
early.
Brewing unit (5) is missing
or was not recognised.
You changed some settings
and want to discard them.
Solution
Wait a few seconds after
the last drink was dispensed
before removing the drip
tray (8).
Switch off the appliance with
the brewing unit (5) in place,
wait three seconds and
switch on the appliance.
Turn off the unit with
the power on/off switch
O / I (9). Press and hold
e
j
the off / (12) and the
h
(11) button and turn
the appliance on with the
power on/off switch O / I (9).
C onfirm by pressing the
start button start (10). The
factory settings are now
activated.
220-240 V – 50/60 Hz
1600 W
15 bar
1.7 liters
300 grams
100 cm
385 x 280 x 479 mm
9.3 kg
Ceramic
en
43