Transporting The Printer; Related Documentation - Epson Stylus Photo 900 Product Information Manual

Epson stylus photo 900: product information

Hide thumbs Also See for Stylus Photo 900:

Table of Contents

EPSON Stylus Photo 900

Transporting the Printer

If you need to ship your printer, you must prepare it for

transportation in its original box or one of a similar size.

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

1. Open the printer cover and turn on the printer. Wait until

the print head locks in the far right position, then turn off

the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the printer cable from the printer.

3. Remove any paper from the printer, then remove the paper

support and roll paper holders.

4. Open the printer cover. Secure the ink cartridge holder with

the plastic insert that came with your printer (or secure it to

the case with tape).

Be sure to remove the insert after installing the printer

in its new location.

5. Close the printer cover, push in the output tray extension,

then close the output tray.

6. Repack the printer and its attachments in the original box

using the protective materials that came with them.

Keep the printer level as you transport it.

After transporting the printer, remove the plastic insert or tape

securing the print head and test your printer. If you notice a

decline in print quality, clean the print head as described on

page 11; if output is misaligned, align the print head as

described on page 12.

EPSON Stylus Photo 900

14 -