Mitsubishi LANCER EVOLUTION 2003 Technical Information Manual page 4

EXTERIOR
DESIGN FEATURES
4
1
3
2
.
1. Large Three Diamond Mark
.
2. Front Bumper with Integrated Grille
.
3. Front Air Dam
The design strikes a continuous line with the bumper
for an integrated look.
.
4. Aluminum Hood
To clearly express the Mitsubishi design identity
while also improving cooling performance, a kick-up
was added to the hood and the outlet was made
larger.
.
5. Smoked Headlight Exterior
The turn signal lights are amber, but the exterior lens
has a smoked finish.
.
GENERAL
TECHNICAL FEATURES
TECHNICAL FEATURES
5
8
AC205386
6
7
9
6. Rear Spoiler
Placing top priority on weight reduction, the rear
spoiler made of carbon fiber is used as a standard.
The vertical struts give the impression of speedy per-
formance and the outer surfaces alone are painted to
the color key.
.
7. Rear Bumper
The design achieves a balance with that of the front
bumper while it remains simple and does not appear
to protrude or stand out.
.
8. Lancer and Evolution Mark
.
9. Rear Combination Light
The expression is designed to match that of the
headlights. The outer lens is clear, the turn signal
lights are amber, and the exterior section is smoked.
(Note that regulations in North America require the
front and rear turn signals to be clear.)
00-3
M2000017000160
AC205387
AC210723 AC