Introduction; Features; Package Contents - infobit iTrans DP-R-22 User Manual

1. Introduction

This Dante 2CH Analog Audio Decoder is an audio
receiver based on the Dante Ultimo solution. It
supports balanced/unbalanced audio output and 3-
level gain adjustment. It receives audio signals from
the transmitting end through network (Dante), then
decodes and outputs the audio as analog audio. It
supports POE function.

2. Features

☆ Analog audio output supports balanced/unbalanced
audio output (unbalanced access to "+" and "GND")
☆ Audio sampling rate supports 44.1kHz, 48kHz and
96kHz (24bit)
☆ Dante solution supports AES67 RTP audio
transmission
☆ Audio output supports
+18dBu, 0dBu (default) and -10dBV
☆ Support DC 12V power supply and POE function
(IEEE802.3af Class 0)

3. Package Contents

① 1× Dante 2CH Analog Audio Decoder
② 1× 6pin-3.81mm Phoenix Connector (male)
③ 1× 2pin-3.81mm Phoenix Connector (male)
④ 1× User Manual
3-level gain
1/4
adjustment：