Using Your Vs-570C As A Wireless Ttl Slave - Bolt VS-570C User Manual

Using Your VS-570C as a Wireless TTL Slave

Setting the remote TTL flash units: You can set the VS-570C as a wireless TTL slave for both the Canon and
Nikon TTL systems. To set the flash unit to function as an automatic TTL slave, follow these steps:
1. Make sure the master flash or controller on your camera is on and set to automatic TTL mode.
2. Select the appropriate group and channel on the master unit. Consult the master's manual to find out how
to set it.
3. Press the Mode button repeatedly to cycle through the flash modes until the Wireless TTL mode icon
appears on the LCD.
A. To set the VS-570C as a Canon TTL slave, press the up and
down buttons repeatedly until "C"- TTL appears. Press the
Mode button to confirm, and the LCD will display "E"-TTL.
B. To set the VS-570C as a Nikon TTL slave, press the up and
down buttons repeatedly until "N"-TTL appears. Press the
Mode button to confirm, and the LCD will display "i"-TTL.
|
48 Using Your VS-570C as a Wireless TTL Slave
TTL TTL
GROUP A
TTL TTL
GROUP A