Using Your Vs-570C As A Wireless Master Or Slave - Bolt VS-570C User Manual

Using Your VS-570C as a Wireless Master or Slave

The VS-570C is equipped with advanced wireless flash functions, allowing you to fire the flash remotely while
still maintaining full TTL or manual control. In addition, it can be set to multiple channels and groups, giving
you unlimited creative lighting possibilities.
Important terms: Here are the terms you'll need to be familiar with in order to learn how to work with multiple
wireless flash units:
Master: This can be the VS-570C's Master mode, the camera's built-in flash, or a dedicated wireless
controller. The master controls how the slave flashes operate in wireless TTL mode. Only one master flash is
allowed in a multiple-flash photography setting. Note that not all cameras and flashes offer master capability.
Slave or remote flash: Flash units that are not directly connected to the camera and are controlled via the
master flash or a controller are called "slave" or "remote" units. There is no limitation on the number of remote
flash units that can be used at once.
|
Using Your VS-570C as a Wireless Master or Slave 31