Sony HDCU1700 Operation Manual page 35

CCU
CONFIGURATION
Page name Item
Page No.
<VIDEO SETUP> SETUP
C11
SD BLK CLP
Q FILTER
G/Y SYNC
VCS RELAY
<VIDEO ADJUST 1> VBS
C12
(Available when an
HKCU1001 or HKCU1003
board is installed)
PIX
WFM
(Available when yet G/Y LEVEL
another VDA board from
B/B-Y LEVEL
the HKCU1003 is installed
to the option slot) R/R-Y LEVEL
<MENU SETTINGS> RESUME
C13
ALARM JUMP
RE DIRECTION
Settings
ON, OFF, ---
OFF, ON
WD, NA
OFF, ON
OFF, ON
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
–99 to 99, 0
–99 to 99, 0
–99 to 99, 0
ON, OFF
ON, OFF
CATEGORY STD, RVS
PAGE STD, RVS
ITEM STD, RVS
DATA STD, RVS
Description
ON: Adds a setup signal to VBS and SD YCD
component signal Ych-SYNC.
OFF: No setup signal is added.
---: Displayed when the format is PAL. (Display only)
Y signals from SD SDI output that are less than 0%
are clipped at 0%.
Sets the Q filter bandwidth. (Displayed only when
HKCU1001 or HKCU1003 is installed.)
Sets the R/G/B component signal's G ch-SYNC to
on/off. (Displayed only when HKCU1001 or
HKCU1003 is installed.)
Sets the PIX/WFM connector output. (Displayed only
when HKCU1001 or HKCU1003 is installed.)
Adjusts the VBS output video level.
Adjusts the PIX output video level.
Adjusts the WFM output video level.
Adjusts the G/Y output video level.
Adjusts the B/B-Y output video level.
Adjusts the R/R-Y output video level.
Turns ON/OFF the menu mode resume page display
function.
Turns ON/OFF the error-related page display
function for when an error occurs while in menu
mode.
CONTROL knob operating mode settings
STD: CONTROL knob clockwise rotation moves the
CCU MENU pointer (,) down.
RVS: CONTROL knob counterclockwise rotation
moves the CCU MENU pointer (,) down.
STD: CONTROL knob clockwise rotation displays
the next page in the menu.
RVS: CONTROL knob counterclockwise rotation
displays the next page in the menu.
STD: CONTROL knob clockwise rotation moves the
pointer (,) down to the next item on the page.
RVS: CONTROL knob counterclockwise rotation
moves the pointer (,) down to the next item on the
page.
STD: CONTROL knob clockwise rotation selects the
next data option.
RVS: CONTROL knob counterclockwise rotation
selects the next data option.
35