_________________________________________________________________
2-2. Rack Installation
2-2-1. Attaching the Mounting Ears
Attach the mounting ears to the side mounting holes of UPS or the battery bank using the screws provided. The
ears should be oriented as shown in Figure 3 below.
2-2-2. Mechanical Fixing of 19-inch Units
Selection of the mounting location
NOTE: The UPS and its battery cabinets are designed to be mounted horizontally in 19-racks. When installing
the units, please consider the weight, especially of the battery extension. Preferably the units should be installed
in the lower section of the rack. UPS systems consisting of several units must be installed so that the battery
extensions are mounted in the lower section of the rack with the UPS directly above.
Included in each Rackmount carton is a rail kit. The Rail Kit consists of the following components (refer to
Figure 4):
fdfefd fd
© 2019 AMETEK Electronic Systems Protection | Technical Support: 1-800-645-9721 | surgex.com
Figure 3
Figure 4
User Manual
8