Maintenance - Bosch SCD 110 Operating Instructions Manual

Maintenance | Event detection mode
SCD with active threshold surveillance is always visible in BLE, even if the user disconnects from the SCD.

7 Maintenance

Warning:
Liquid which enters the device can cause short circuits and damage the device.
This could cause fire, data loss and incorrect measurements.
8 Further product related information
Please find all product related documents and user guides on our website:
https://www.bosch-connectivity.com/products/industry-4-0/sense-connect-detect/downloads/
Download the SCD Sensor App
9 Error description
Problem
The app does not display any values
The light sensor is permanently at 0
The protective cover is damaged
None of the values are changing—is the sensor
defective?
Data subject not change without notice | Printed in Germany | October 19 | Version 1.0
Damage to materials can cause risk of fire!
Apple App Store Google Play Store
Solution
Check whether you have switched on the
sensors in the app.
Check whether any additional labels have been
attached to the SCD. These can cover the light
sensor.
Do not use the device.
Check whether you have switched on streaming
in the app.
Check if the sensor you are interested in is
active.
20 | 24
BCDS/GM