Table of Contents
Advertisement
Chapter 11 Troubleshooting
This chapter describes problems you may encounter while using DVP510A. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center.
No.
Problems
1
Boot without power
signal
2
No image output
from the DVP510A
3
Unable to focus
4
The image is
incomplete
5
Forget the password
for turning on
6
Dukane Document
Camera,
and other
applications cannot
be used
simultaneously
7
When the unit is
turned on, the
auxiliary floodlight
do not light
8
DVP510A fails to store
images or react
Make sure you have plugged in the power cord.
1. Check the power
2. Check all cable connections. Refer to
Installation and Connections
3. Check the
, refer to DVP510A
Descriptions of major functions 7.2 I would like to
switch image
sources.
4. Check the settings for the source of the projector. For
the appropriate input selection of the projector, refer to
the projectors user manual.
5. Check if DIP Switch is properly set. Refer to
DIP Switch Settings
Probably the document is too close. Press [ZOOM-] on the
remote control or control panel. Or pull away the
distance between document and lens, then press [AUTO
TUNE].
Check the Auto Image setting of your projector. Please
refer to the user manual of the projector or check for the
DIP SWITCH settings.
Please contact your distributor or the service center.
Dukane Document Camera, B-Works2™ and other
applications cannot be executed simultaneously. Only one
application can be executed at a time. Please close the
currently running applications and then execute the
application to be used.
Please make sure the arm lamp is set to [OFF]. For the
switch-on or -off of arm lamp, refer to DVP510A
Chapter 7 Descriptions of major functions 7.8 I would
like to turn on/off the
1.
Check to see if the stored data have reached the
maximum size of the USB device (priority) or internal
memory.
2.
Please make sure if the Capture function is set to
Solutions
Chapter 4
in this manual.
User Manual Chapter 7
for related settings.
lamp.
Chapter 9
User Manual
English - 54
Advertisement
Table of Contents
