Digital Visualizer User Manual Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software, please visit the Dukane web site at www.dukcorp.com/av and look at the specific model SUPPORT or DOWNLOADS section.
No part of this document may be copied, reproduced, or transmitted by any means, without prior written permission from DUKANE CORP. Except documentation kept by the purchaser for backup purposes. In the interest of continuing product improvement, DUKANE CORP. reserves the right to change product specifications without notice. Information in this document may change without notice.
User’s within this unit. Manual with this unit. FCC Warning This Digital Visualizer has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 DUKANE AV...
Readjust the position between this device and the receiver. ♦ Connect the power plug of this device and the device in different sockets. ♦ Use a screwdriver to fasten the power plug to ensure EMI control and the device operates in its normal ♦ fashion. DUKANE AV...
Chapter 2 Package Content Please make sure the package comes with the following items. DVP506 Quick start guide User Manual Download Card Power Cable USB Cable C-Video Cable VGA Cable Remote Control DUKANE AV...
Chapter 3 Product Overview 3.1 Front View/ Rear View Camera Head Camera Arm Lamp Backlight Remote Control Slot CF card slot Lamp lock Control Panel Button Function Guide 10. IR Sensor (used for Remote Control) 11. Input/Output Port (including DIP Setting) DUKANE AV...
Connect external device with RS232, e.g., central control system used in classroom or meeting 8. Setting Setting output signal modes 9. DC 12V output Output the 12V (DC) from Digital Visualizer, such as the backlight. 10. AC-in Use this to connect the power cable (100 - 240V) for the power input DUKANE AV...
3.3.1 RGB & XGA Output (Default ) 3.3.2 Video Output (NTSC) NTSC for USA Taiwan Panama Philippines Canada Chile Japan Korea Mexico 3.3.3 Video Output (PAL ) PAL Setting: Others than above NTSC listed countries. (Default) 3.3.4 SVGA ( 600 x 800 )Output DUKANE AV...
3.4 Control Panel DVP506 Power Power on/off Source Select PC or Camera to output Image Change between Photo or Text mode Mode Select Normal Film Slide Microscope Capture Capture image to internal memory Play, Delete Recall/delete the saved images in the...
Recalls thumbmails of the saved images in the Digital Visualizer or Plays image selected. 12. Delete Deletes the saved image in the Digital Visualizer Caution Using the wrong model battery might cause an explosion. Also please follow the related instruction to discard the battery. DUKANE AV...
Press <POWER> and open Digital Visualizer. The red LED (blinks till finishing the initialization). It then becomes green. Press <LAMP> on remote control to activate light sources on both sides or the backlight source. You can position the lamp at an angle to obtain better illumination. DUKANE AV...
Chapter 5 Operation 5.1 Basic Functions 5.1.1 Source The default input source is set as "Camera", press Source to switch. Control Panel Remote Control Monitor Notebook Projector 5.1.2 Zoom In/Out Zoom in/out by pressing continuously Control Panel Remote Control DUKANE AV...
5.1.3 Auto Focus Execute AF by pressing once. Control Panel Remote Control 5.1.4 Brightness 5.1.5 Lamp Switch ; ON / OFF the lamp and backlight 5.1.6 Photo/Text/Gray DUKANE AV...
5.2.2 Delete Captured Images Remote Control or Control Panel Press Play to access into browsing screen. Press to select the miniature image that you want. Press Delete to delete the selected miniature. Press Menu to exit. DUKANE AV...
means one menu only. Press Enter to execute the specified function. 7. Press Menu to exit OSD menu. Note: After opening the function menu, the system will close the menu automatically if unused for a period of time. DUKANE AV...
Eapanol / Русский / English / Traditional Chinese /Simplified Chinese Reset all default Factory Reset Enter / Exit setting Setting Execute load setting Preset Load parameters Execute Save setting Preset Save parameters Flip, Preset, Focus+/- Flip, Preset, Focus+/- DUKANE AV...
To enhance USB transmission, make sure that your PC supports USB protocol (the Digital Visualizer is based on USB 1.1 / 2.0 Full speed and USB software). For detailed information, please refer to software user’s guide. Go to the Dukane web site www.dukcorp.com/av for the specific model to obtain the USB software (queue) and the driver.
1- Please be sure the remote control is aimed at the IR sensor on the front edge of the base. 2- Please check the battery in the remote control. IR Sensor DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles , IL 60174 800-676-2487 / 630-762-4032 www.dukcorp.com/av...
Need help?
Do you have a question about the DVP506 and is the answer not in the manual?
Questions and answers