Advertisement
6.6 Install two p-clamps to the lower ROPS brackets
as shown to secure the larger A/C hose to the
ROPS bracket. Twist clamps and adjust hose
position so that hose does not contact sharp
edges of ROPS bracket.
Hardware Used
1/4-20x1" Button Head Bolt
1/4-20 Flange Nut
3/4" P-Clamp
6.7 Secure both hoses to the vehicle frame using a
cable tie as shown. Ensure that the hoses will not
contact any sharp edges.
Hardware Used
Cable Tie
Step 7: (Wiring)
7.1 Cut the cable ties securing the wiring harness and
attach the harness to the lower ROPS brackets
with p-clamps as shown.
Hardware Used
1/4-20x1" Button Head Bolt
1/4-20 Flange Nut
3/4" P-Clamp
7.2 Secure the wire harness to the vehicle frame
using a cable tie as shown. Ensure that the
harness will not contact any sharp edges.
Hardware Used
Cable Tie
CAB INSTALLATION
Qty
2
2
2
Qty
1
Qty
2
2
2
Qty
1
Fig. 6.6 (P-Clamp Hoses to ROPS Bracket)
Fig. 6.7 (Cable Tie Hoses)
P-Clamps
Fig. 7.1 (P-Clamp Wire Harness to ROPS Bracket)
Cable
Tie
Fig. 7.2 (Secure Wire Harness to Vehicle)
14 of 30
P-Clamps
Cable
Tie
Advertisement
