Solving Wireless Printing Problems - Epson Stylus C82WN Setup And Installation Manual

Solving Wireless Printing
Problems
This chapter gives you information on solving problems with print server setup and
wireless printing. If you have a problem with print quality or paper feeding, see
Printer Basics for help.
Note: If you need to clean or align the print head, follow the instructions in Printer
Basics to run the appropriate utilities. These programs work on your wireless
network the same as they do when the printer is connected directly to a
computer.
If you can't print, follow these steps to diagnose the problem:
First, check for any red lights on the printer. They let you know if an ink cartridge
runs out or your paper is jammed. You may also see a message on your computer
screen. See Printer Basics for more information.
If the printer lights do not indicate a problem, try running a printer check. Turn
off the printer and disconnect the print server. Hold down the ) paper button,
then press and release the P power button. After the printer test page prints, turn
off the printer. See Printer Basics for more information.
If the printer test page doesn't print, contact EPSON as described on page 52.
If the test page prints, test the connection between the printer and print server.
Connect the print server as described on page 18. Turn on the printer, then press
the test button on the print server and release it immediately, as described on
page 19. The print server status page prints.
If the print server status page doesn't print, try resetting the print server. Press the
test button and hold it down until the green and yellow lights on the print server
come on briefly (about five seconds). Then press the button again for one second
to print the status page. If it still doesn't print, contact EPSON as described on
page 52.
If the print server status page prints, but you still can't print through your wireless
network, follow the suggestions in this chapter to solve the problem.
43