Connecting The Print Server; Setting Up The Print Server - Epson Stylus C82WN Setup And Installation Manual

Setting Up the Print Server

Once the software is installed, you're ready to connect the print server to the printer
and configure it for your network. Before you start, make sure the printer is turned
off.

Connecting the Print Server

1. Slide the print server into the base and press firmly to
attach it.
2. Locate the parallel cable included
with the printer. Connect the larger
end of the cable to the printer's
parallel port.
Then secure it with the wire clips.
3. Connect the other end of the cable
to the parallel port on the print server and secure
it as necessary.
Configuring Wireless Printing for Macintosh
37