Caution: Make sure you follow all the Safety Instructions listed in the Printer
Basics book.
3. Slide the paper suport into the
grooves on either side of the sheet
feeder.
The paper support should fit
securely.
Installing the Ink Cartridges
Follow these steps to plug in the printer, turn it on, and install the ink cartridges:
1. Plug the printer's power cord into a grounded
electrical outlet.
2. Press the P power button until the green power
light comes on.
Caution: Always use the P power button to turn the
printer on or off. Never use an external switch, such as
a power strip switch or wall switch.
3. Lower the printer's output tray and open the cover.
Warning: Keep ink cartridges out of the reach of
children. If ink gets on your skin, wash the area
thoroughly with soap and water. If ink gets in your
eyes, flush them immediately with water.
Power button
Setting Up Your Printer
9