Other Paper Handling Problems - Epson Stylus 1500 Reference Manual

The continuous paper does not eject properly.
The page is too long. Tear off the last printed page and press
the Load/Eject button to feed the paper backward. However,
if you are printing on labels, tear off the paper entering the
printer, then press the LF/FF button to feed paper forward.
Use paper that is within the specified length. See Appendix B.
Change the page length setting for continuous paper. See
"Using the Default Setting Mode" in Chapter 2.
The paper is jammed inside the printer. Be sure you remove all
of the paper.
Caution:
c
Use the knob on the left side of the printer only to clear paper
jams and only when the printer is off. Otherwise, you may
damage the printer or change the top-of-form position.

Other Paper Handling Problems

If you still have paper handling problems, see the following
suggestions.
The printer loads more than one sheet at a time.
Remove the stack of paper and fan it. Tap it on a flat surface to
even the edges. Then reload the paper.
The paper is too thin or thick, or was exposed to excess
humidity; see Appendix B for exact specifications.
Make sure the thickness adjustment lever is set correctly for
your media type; see Chapter 1 for instructions.
Troubleshooting
4-15