Ibm Xl24E Emulation Codes; Character Tables - Epson Stylus 1500 Reference Manual

IBM XL24E Emulation Codes

This printer emulates the IBM Proprinter with the following
commands. (For detailed information, see the IBM X24/X24E
reference manual.)
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U
Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*), ESC 0, ESC 1, ESC 2, ESC 3,
ESC 3 (AGM*), CR
Page format:
ESC C, ESC X, ESC N, ESC O, ESC 4
Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM*)
Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I
Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T, ESC S,
ESC -, ESC _
Spacing:
BS, SP, ESC [ \
Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC \
Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC [ g, ESC * (AGM*)
* Alternate Graphics Mode

Character Tables

The printer comes with an installed set of character tables.
However, when printing from Windows and most DOS
software programs, the printer prints the characters you see on
screen and does not use its built-in character tables. Unless
you're printing from a DOS program, and cannot print the
character you need, you should never have to change the
character table.
Note:
You never need to select the printer's character tables or fonts when
using the printer with a Macintosh.
C-2
Commands and Character Tables