Epson Stylus 1500 Reference Manual page 52

To turn on Default Setting mode and print instructions, turn off
the printer. Make sure there is paper loaded in the printer.
Then hold down the Economy/Condensed button while you
turn the printer back on. Follow the instructions the printer
prints to change the default settings by pressing the buttons on
the control panel. When you are finished, press Pause and
turn off the printer to exit Default Setting mode.
The printer functions are shown in the table below and
described in the following paragraphs. The default settings are
in bold.
Setting
Print direction
Font
Pitch
I/F mode
Auto interface wait time
Software
Auto CR*
AGM*
Character table
International character set
for Italic table
Auto line feed
Network I/F mode
0 slash
Page length for
continuous paper
Skip over perforation
Auto tear off
Options
Auto, Bi-D, Uni-D
Roman, Sans Serif, Courier, Prestige,
Script, Roman T, Sans Serif H
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
Auto, Parallel, Option
10 seconds, 30 seconds
ESC/P 2, IBM XL24E
Off, On
Off, On
PC437, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Roman 8,
ISO Latin 1, Italic
Italic U.S.A., Italic France, Italic Germany,
Italic U.K., Italic Denmark 1, Italic Sweden,
Italic Italy, Italic Spain I
Off, On
Off, On
0, 0 /
11 inch, 12 inch, 8.5 inch, 70/6 inch, Others
Off, On
Off, On
Controlling the Printer
2-7