Loading Banner Paper; Removing Banner Paper - Epson Stylus 1500 Reference Manual

Loading Banner Paper

To load banner paper, follow steps 1 through 4 under "Loading
Single Sheets Manually" on page 1-11.
Note:
If you are printing from Windows, choose Manual Feed Slot (Banner)
as the paper source.
If you are using the Macintosh printer driver, turn off the Page Gap
setting. See your Setup and Software Guide for Macintosh for
more information.
If your document is longer than 44 inches, its length must be
evenly divisible by the paper size you choose. For example, if
you are printing a document that is 66 inches long, choose
Long Paper 17 33 in from the Paper Size list. The printer
automatically multiplies the setting (33 inches) by 2 to match
your document length.

Removing Banner Paper

After you finish printing on banner paper, you must remove it
from the manual feed slot before turning off the printer. Follow
these steps to remove banner paper:
1. Cut off the paper at the back of the printer where it enters
the manual feed slot.
2. Press the Load/Eject button to feed the paper out of the
printer.
1-20
Paper Handling