Insufficient Memory To Print All Copies; Paper Handling Problems; Paper Does Not Feed Properly - Epson WorkForce AL-M300 Series User Manual

Insufficient memory to print all copies

Cause
The printer does not have sufficient memory to collate
print jobs.

Paper Handling Problems

Paper does not feed properly

Cause
The paper guides are not set correctly.
The paper source setting may not be correct.
There may be no paper in the paper source.
The size of loaded paper differs from the control panel or
printer driver settings.
Too many sheets may be loaded in the MP tray or paper
cassettes.
If paper does not feed from the optional paper cassette
unit, the unit may not be installed properly.
The pickup roller is dirty.
The extra-thick paper that is loaded may have the
following problems:
- The paper is too stiff
- The paper is too smooth
- The paper is curled
AL-M300/AL-M400 Series
What to do
Reduce the contents of print jobs, or increase the available
memory on your printer. You can increase the available memory
by installing an optional memory module. See "Installing a
memory module" on page 117 for details.
When RAM Disk is set to Maximum or Normal on the control panel,
you can increase the available memory space by changing this
setting to Off.
What to do
Make sure that the paper guides in all the paper cassettes and the
MP tray are set to the correct paper size positions.
Make sure that you have selected the correct paper source in your
application.
Load paper into the selected paper source.
Make sure that the correct paper size and paper source are set in
the control panel or printer driver.
Make sure that you have not tried to load too many sheets of
paper. For the maximum paper capacity for each paper source,
see "General" on page 199 (for AL-M300 Series) or "General" on
page 207 (for AL-M400 Series).
For instructions on installing the unit, see "Optional Paper
Cassette Unit" on page 112.
Clean up the pickup roller. For instructions, see "Cleaning the
pickup roller" on page 128.
Feed a paper from the standard paper cassette.
When the paper is 279 mm or longer vertically, set 2 in the
Special setting of the Printer Adjust Menu, set the Paper
Type setting to Special in the printer driver, then try to print
again. See "Printer Adjust Menu" on page 90 for details.
User's Guide
Troubleshooting 163