Emergency Call; Selcall Code Selection - Maxon SM-2000E Series User Manual

Emergency Call

Emergency mode on/off
Assign 'Emergency Call' function to any of Programmable keys P1-P4 in the programmer.
If you push the emergency key, the transceiver transmits three alert tones and will stay in the
TX mode until programmed TX time has ended.
Backlight Blinking
LCD backlight blinks during emergency mode.
(1) LCD Display
LCD displays '-EMG-' during emergency mode.
Emergency ID
The transceiver transmits DTMF or 5 TONE SELCALL code when it goes to emergency mode.
This is usually used for ANI when in a emergency situation.
EMERGENCY CALL DIAGRAM
The following diagram shows the process of emergency call.
TX
Emergency
Radio moves
ID (Option)
to Emergency
3 Times
Push emergency key.
23
TX or RX
Emergency status
exited

Selcall code selection

Press Selcall selection button

The LCD will display:
Then press the or display scrolls through programmed TX encode list.
Or
To send the correct call press P2 the

The LCD will display:
The radio displays the above when sending call the 01 represents the channel number.
Please Note: If groups are programmed you will have to select the correct group first,
see details on page 11.
Call Button
24