Checking And Cleaning Radiator To Prevent Overheating; Oiling - Kubota G2160E Operator's Manual

BChecking and Cleaning Radiator to
Prevent Overheating
To avoid personal injury:
A Be sure to stop the engine and remove the key
before cleaning.
Daily or after every 5 hours of operation, check to be sure
the radiator screen and panel screen are clean. Dirt or
chaff on the radiator screen or radiator core decreases
cooling performance.
1. Remove the radiator screen and remove all foreign
material.
2. Remove the dust from between the fins and the tube.
3. If scale forms in the tube, clean with scale inhibitor or
its equivalent.
4. Each time the panel screen is covered with grass
during operation, wipe off the screen by hand.
Check the radiator screen from time to time if grass
often gets on it.
5. If dust or chaff is accumulated inside of the panel,
clean the inside of the panel.
(1) Panel screen
(2) Radiator screen
PERIODIC SERVICE
BOiling
To avoid personal injury:
A Be sure to stop the engine and remove the key
before oiling.
Oil the following points before starting.
(1) Link fulcrum
(1) PTO lever (fulcrum)
(1) Front PTO cable
27