Next steps
1. Install the
base
cover.
2. Install the
SIM
card.
3. Install the
SD memory
4. Follow the procedure in
Coin cell
Removing the coin cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
Steps
1. Disconnect the coin-cell battery cable from the connector on the system board [1].
2. Peel and lift the coin-cell battery off the computer [2].
32
Removing and installing components
card.
after working inside your
before working inside your
card.
cable.
computer.
computer.