Removing The Battery - Dell Latitude 7400 2-in-1 Service Manual

● Always purchase genuine batteries from

Removing the battery

Prerequisites
1. Follow the procedure in
2. Remove the SD memory
3. Remove the base cover.
4. Disconnect the battery
5. Remove the speakers.
Steps
1. Peel off the tape [1] and unroute the wireless antennae cables from the routing guides on the battery [2].
NOTE: The cables for the wireless antennas are routed over the plastic bracket at the top left corner and within the
routing channels along the left and bottom side of the battery. As a result, technicians must be careful when unrouting
the antenna cables from their routing guides while they are still attached to the wireless card. If there is difficulty in
unrouting the antenna cables from their routing channels, remove the
unroute the cables.
2. Remove the single (M1.6x4.5) screw [1] in highlighted in red circle and four (M2x3) screws highlighted in yellow color that
secure the battery to the chassis.
3. Lift and remove the battery off the computer [2].
before working inside your
card.
cable.
www.dell.com or authorized Dell partners and resellers.
computer.
WLAN card from the computer to create space to
Removing and installing components 69