Next steps
1. Connect the
battery cable
2. Install the
base
cover.
3. Install the
SD memory
4. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
5. Remove the
coin
cell.
6. Remove the SSD.
7. Remove the
WLAN
card.
8. Remove the
WWAN
card.
9. Remove the fan.
10. Remove the speakers.
11. Remove the heatsink.
12. Remove the battery.
card.
after working inside your
before working inside your
card.
cable.
computer.
computer.
Removing and installing components
73