Wlan Card; Removing The Wlan Card - Dell Latitude 7400 2-in-1 Service Manual

Hide thumbs Also See for Latitude 7400 2-in-1:
Table of Contents

Advertisement

Next steps
1. Connect the
battery cable
2. Install the
base
cover.
3. Install the
SD memory
4. Follow the procedure in

WLAN card

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
Steps
1. Partially peel off the Mylar sheet that covers the WLAN card [1].
2. Remove the single (M2x2) screw [2] that secures the WLAN card bracket to the WLAN card.
3. Remove the WLAN card bracket from the WLAN card.
4. Disconnect the wireless antennae cables [4] from the connectors on the WLAN card.
5. Slide and remove the WLAN card [5] from the connector on the system board.
38
Removing and installing components
card.
after working inside your
before working inside your
card.
cable.
computer.
computer.

Advertisement

Table of Contents
loading

This manual is also suitable for:

P110g

Table of Contents