Next steps
1. Connect the
battery cable
2. Install the
base
cover.
3. Install the
SD memory
4. Follow the procedure in
Fan
Removing the fan
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the
battery
NOTE:
For the Latitude 7400 2-in-1 model shipped with a WWAN card, there is an L-shaped bracket (P-sensor bracket)
that covers the four WWAN LTE antenna cable connections to the system board. The screw that secures the bracket to
the system also helps secure the fan to the system. Technicians must first remove the bracket before removing the fan and
then reinstall the bracket after the fan is reinstalled.
Steps
1. Peel off the Mylar sheet from the system board.
44
Removing and installing components
card.
after working inside your
before working inside your
card.
cable.
computer.
computer.