Network Camera User Manual
Synchronize Time Manually
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click Manual Time Sync.
4. Choose one time synchronization method.
Select Set Time, and manually input or select date and time from the pop-up calendar.
•
•
Check Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.
Set NTP Server
You can use an NTP server when an accurate and reliable time source is required.
Before You Start
Set up an NTP server or obtain NTP server information.
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click NTP.
4. Set Server Address, NTP Port, and Interval.
NOTE:
Server Address is the NTP server IP address.
5. Click Test to test the server connection.
6. Click Save.
Synchronize Time by Satellite
NOTE:
This function varies by device.
Steps
1. Enter Configuration → System → System Settings → Time Settings.
2. Select Satellite Time Sync.
3. Set Interval.
UM Network Camera 072221NA
72